Ergebnis 1 bis 8 von 8

Hybrid-Darstellung

Vorheriger Beitrag Vorheriger Beitrag   Nächster Beitrag Nächster Beitrag
  1. #1

    Registriert seit
    15.09.2020
    Beiträge
    112

    Strebe - Paraleverstrebe 365mm

    Hallo, hat jemand eine R1100GS Schwinge auf einem R80/R100 2V Rahmen mit Strebe - Paraleverstrebe (365mm für BMW R 850 - 1150 - 1100 GS) verstellbar montiert, so dass man das Heck des Motorrads anheben/absenken kann?


    Wie viele mm Einstellung haben Sie gewählt?


    Danke



    Hi, has anyone mounted a R1100GS swingarm on a R80/R100 2V frame with strut - paralell strut (365mm for BMW R 850 - 1150 -1100 GS) adjustable so you can raise/lower the rear of the bike?


    How many mm adjustment you have chosen?


    Thanks
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken 51i-S5WyWWL._AC_SL1500_.jpg   BMW-R8501100GS-Adjustable-Alloy-Torque-Arm.jpeg  
    Geändert von HOOK74 (16.01.2022 um 10:00 Uhr)

  2. #2
    Avatar von kosi
    Registriert seit
    15.08.2007
    Ort
    Hagen
    Beiträge
    2.791

    AW: Strebe - Paraleverstrebe 365mm

    Hi,

    I use the MV-Verholen adjustable strut. But with a 1150 swingarm. This strut was for a R1100S and too long. So, I have had cut them. But you need for my point of view only the original R1100 GS strut length, or not!?

  3. #3

    Registriert seit
    15.09.2020
    Beiträge
    112

    AW: Strebe - Paraleverstrebe 365mm

    Zitat Zitat von kosi Beitrag anzeigen
    Hi,

    I use the MV-Verholen adjustable strut. But with a 1150 swingarm. This strut was for a R1100S and too long. So, I have had cut them. But you need for my point of view only the original R1100 GS strut length, or not!?


    Hi, thanks for your reply.
    I think I didn't explain myself well and made a mistake...also in translation.
    Anyway the 365mm torque arm is originally mounted on R850GS-R1100GS- R1150GS-R1100S
    The 385mm one on R850R-R1100R-R1150R rockster-R850RT-R1100RT-R1150RS-R1150RT.


    I am adapting an R1100GS swingarm on R100GS frame. I haven't decided yet whether to tilt the engine, but since I have to make some measurements I wanted to build an adjustable torque arm so that I can (in relation to the Ujoint working angle) check if and how much I can raise the rear of the bike (having longer forks). Maybe something already exists on the market, maybe not. If I have to build it I was wondering how many mm of adjustment would be right for all my measurements.


    Translated with www.DeepL.com/Translator (free version)

  4. #4

    Registriert seit
    08.11.2011
    Ort
    47533 Kleve/ Niederrhein
    Beiträge
    225

    AW: Strebe - Paraleverstrebe 365mm

    I modified the original one from the R100GS....
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken 20220116_171257.jpg   20220116_171223.jpg  

  5. #5

    Registriert seit
    15.09.2020
    Beiträge
    112

    AW: Strebe - Paraleverstrebe 365mm

    Zitat Zitat von screaming BMW Beitrag anzeigen
    I modified the original one from the R100GS....

    Hello, yes I agree, nice & simple solution.

  6. #6
    Avatar von kosi
    Registriert seit
    15.08.2007
    Ort
    Hagen
    Beiträge
    2.791

    AW: Strebe - Paraleverstrebe 365mm

    For testing you could use a timber slat, with two holes with a distance of 365mm and 385mm. Or the second way cut the original one and install a normal threaded bar. But only for test purpose

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
OK, verstanden

Diese Website verwendet Cookies. Durch die Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass Cookies gesetzt werden. Falls Sie nicht einverstanden sind, können Sie die Browsereinstellungen ändern oder diese Seite verlassen. Weitere Information hier